Skip to main content
Home  /  Laser Machines  /  Legacy Systems  /  Fusion 32/40
Fusion

Fusion 32 / 40 Tech Specs

Fusion 32 / 40 Tech Specs

Series: 13000


Technical specifications of our Fusion 32 and 40 systems. The Fusion 32/40 are legacy systems of Epilog Laser. See specifications on these unit below.

Technical Specifications


  Laser Machine:

Fusion 32

Fusion 40

  Work Area:
32″ x 20″
(812 x 508 mm)
40″ x 28″
(1016 x 711 mm)
  Material Thickness:
14″ (101.5 mm) 13.25″ (336 mm)
  Laser Tube Wattages:
30, 40, 50, 60, 75 or 120 watts
  Laser Source:
CO2, air-cooled, all-metal Waveguide laser tube, 10.6 micrometers.
  Intelligent Memory Buffer:
Store unlimited files up to 128MB. Rolling buffer allows files of any size to be engraved.
  Print Driver and Software:
Laser Dashboard, Epilog Control Center, and Epilog Job Manager.
  Air Assist:
Attach an air compressor to our included Air Assist to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
  Red Dot Pointer:
Since the laser beam is invisible, the Red Dot Pointer on Epilog’s Laser Systems allow you to have a visual reference for locating where the laser will fire.
  Operating Modes:
Optimized raster, vector or combined modes with engraving and cutting in one job.
  Motion Control System:
High-speed, continuous-loop, DC brushless servomotors using linear and rotary encoding technology for precise positioning.
  X-Axis Bearings:
Ground and polished stainless steel, teflon coated, self-lubricating bearings.
  Print Interface:
10 Base-T Ethernet or USB connection. Compatible with Windows XP/Vista/7/8/10.
  Size (W x D x H):
52.5″ x 35.5″ x 40.75″ (1334 x 851 x 1035 mm) 60.5″ x 41.25″ x 42.25″ (1537 x 1048 x 1073 mm)
  Weight:
500 lbs (227 kg)
Dual Source: 536 lbs (243 kg)
643 lbs (292 kg)
Dual Source: 679 lbs (308 kg)
  Electrical Requirements:
Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase.
  Ventilation:
650 CFM (1104 m3/hr)external exhaust to the outside or internal filtration system required. There are two output ports, each 4″ in diamter.
  Laser System Classification:
Class 2 Laser Product – 1 mW CW Maximum 600-700 nm.